For your cloth face mask!
Pleasant Prairie
Your Best Choice for Furnace, Heat Pump, & AC Repair in Pleasant Prairie, WI
In the Racine area, First Call Heating & Cooling, Inc. is well known for providing exceptional furnace repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with First Call Heating & Cooling, Inc. because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace, Heat Pump, & AC Repair in Pleasant Prairie, WI in Racine WI. Call us today at (262) 634-9025!
Local Reviews
for Pleasant Prairie, WI
Excellent service
JoseSantos - Pleasant Prairie, WI
Great service
Veronica - Pleasant Prairie, WI
Very knowledgeable and friendly
Fast, effective
Marlene - Pleasant Prairie, WI
Good
Knowledgeable and very nice
Bryan - Pleasant Prairie, WI
Guys did an awesome job to check through and explain everything.
Great service !
Corrin - Pleasant Prairie, WI
Great service fast and professional
Laura - Pleasant Prairie, WI
Great service. Friendly serviceman
Ken - Pleasant Prairie, WI
Did great!
Corrin - Pleasant Prairie, WI
Had a great experience. They were able to work me in same day.
Quick work and great install.
Tony - Pleasant Prairie, WI
Everyone from the estimator to the installer did an outstanding job.
Great service
Linda - Pleasant Prairie, WI
Seemed very knowledgeable and showed me how the filter on humidifier on furnace was installed. I apparently had it upside down all this time
Very professional
Jose - Pleasant Prairie, WI
Great service technician
Janine - Pleasant Prairie, WI
The service technician was awesome. Explained what she was doing and showed me how to change the filter. Also very pleasant. She seemed very knowledgeable and answered all my questions. Would be happy to have her again.
Excellent Service!
Jason - Pleasant Prairie, WI
The technician and service was great from start to finish, as well as the lady who scheduled my appointment when I called this morning. Would highly recommend!
James
James - Pleasant Prairie, WI
Great service
Bryan - Pleasant Prairie, WI
Mack was friendly and informative.
Great Service
Tom - Pleasant Prairie, WI
Very informative and polite
Great service and very informative. Super friendly.
Bryan - Pleasant Prairie, WI
Good service, bad fee.
Cathy - Pleasant Prairie, WI
Our whole house dehumidifier decided to break itself, thankfully within the 5 year warranty. I called first call and they came out that same day. They did charge me $94 for a service call which really upset me since it wasn’t being serviced, it was being checked for not working correctly. And the lady at the office didn’t tell me that either, very annoyed about that since the unit was under warranty. 2 weeks later we have a new unit. Hopefully this one lasts longer. The technician was fantastic. Very happy with him. So polite. Very kind. 👍🏻
Fabulous company
JFE - Pleasant Prairie, WI
Great service and proficiency both in the office and out in the field. As good as any company I've ever worked with.
Service survey
James - Pleasant Prairie, WI
Andrew P.
furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Matthew D.
Removed gas supply and burner support for garage heater, to get to pilot assembly, removed part and replaced, also replaced with new thermocouple, out unit back together and tested operations, found piezo switch weak and inoperable, will quote. Lit unit and confirmed pilot stays lit. Homeowner and I were unable to locate power switch to garage wall heater, customer will have electrician locate. Unit running just on pilot flame at this time
Matthew D.
Bryant furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Tyler E.
Trane furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned condensate trap, checked air filter, inspected flue pipe, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Eric G.
York rooftop repair and maintenance
Eric G.
Bryant furnace blower motor replacement
Tyler E.
Trane furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Eric G.
Bryant furnace tune up,noisy blower
Eric G.
Trane furnace tune up
Eric G.
Buderus boiler tune up
Eric G.
Trane furnace tune up
Eric G.
Gas line repair, new gas shut off
Eric G.
Honeywell 4zone panel replacement
Matthew D.
Found basement furnaces off with twinning error, found 120v supply and 24v board supply to right (1st) furnace ok. Found 120v in to secondary left furnace but no power out to transformer, we need to order a IFC board for this unit. took dual furnaces off of twinning mode, removed plastic jumper on IFC, removed twin wires on terminal board. Fired up right (1st) furnace by bypassing twin mode, furnace runs fine, space temp 63° set tstat for 68°, should satisfy at some point despite the large sanctuary space and running half capacity.
Tyler E.
Rheem Checked thermostat and verified operation, checked air filter, cleaned condensate trap, cleared drain lines, inspected burners and heat exchanger, cleaned intake pipe, cleaned flame sensor, checked ignitor, checked blower and inducer motor amperage, checked gas pressure, checked temperature rise, checked all wire and electrical connections, and cleaned unit. Unit running and heating well!
Eric G.
Trane furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Tyler E.
Trane furnace not heating due to ignition issues caused by dirty burner track and flame sensor. Cleaned burners and flame sensor; system is now running and heating without and further issues to report! Customer joined annual preventative maintenance plan with First Call heating and cooling!
Andrew P.
furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Brian C.
Quoted customer a new Modulating furnace with variable speed AC system.
Tyler E.
Return call to replace inducer motor on a Trane furnace. Replaced part and verified operation, system is now running and heating with no further issues to report.
Tyler E.
Trane furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating but needs a new inducer motor, part is ordered.
Tyler E.
Trane furnace not heating due to a shorted circuit board. Part is ordered and customer is rescheduled for replacement. Customer will also have a regular furnace tuneup completed on return visit. No further issues to report.
Ben E.
Installed new Bryant furnace
Brian C.
Quoted customer a new furnace.
Mack T.
Just found a a.o.smith water heater with a bad thermocouple
4603 Durand Avenue
Racine, WI 53405
Telephone:
Fax: 262-634-3769
7:30 am - 5 pm