Furnace, Heat Pump, & AC Repair in Kenosha, WI
Your Best Choice for Furnace, Heat Pump, & AC Repair in Kenosha, WI
In the Racine area, First Call Heating & Cooling, Inc. is well known for providing exceptional furnace repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with First Call Heating & Cooling, Inc. because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace, Heat Pump, & AC Repair in Kenosha, WI in Racine WI. Call us today at (262) 634-9025!
Local Reviews
for Kenosha, WI
Above and beyond
Nicole - Kenosha, WI
As usual, First Call went above and beyond to not only fix our furnace problem, but Tyler took the time to explain the issues to me and ask my confirmation before completing the work. Further, he apprised me of the charging options so that I could make an informed decision for the best price. He was clean, polite, knowledgeable, and helpful. I will continue to recommend First Call to anyone needed HVAC work.
Great service!
Nelson - Kenosha, WI
Tyler was prompt, knowledgeable, thorough with his job and offered great advice on care of heater.
Good job
Harjeet - Kenosha, WI
Great service
Marianne - Kenosha, WI
First Call and Matt—Great Service
LuAnn - Kenosha, WI
Thank for the quick furnace fix—Matt had to come twice, was very nice and did a fine job.
Very informative, cordial
Margaret - Kenosha, WI
Great service explained concerns.
Cathy - Kenosha, WI
Great service!
Patricia - Kenosha, WI
I am always happy with First Call and their staff.
Furnace troubleshooting
Scott - Kenosha, WI
He was very polite, efficient and easy going. The tech arrived quickly and knew what he was doing. I knew if my secondary heat exchanger was the issue Payne would cover the repairs. You guys didn’t try to sell me a covered fix. I appreciate your honesty by not trying to upset me on a covered fix. As of right now I would use your company again in the future.
Very pleased with the service call
William - Kenosha, WI
Andrew was very pleasant and seemed to do a thorough job. He was very patient and reviewed everything he checked and explained his findings clearly so I could easily understand them. He offered warranty information without being pushy and again explained the benefits clearly.
Great Service
Christine - Kenosha, WI
Tyler was extremely professional and explained everything so I could understand what he was doing and what our needs are in the future.
Great service
Vivian - Kenosha, WI
Great service
Deborah - Kenosha, WI
Winter Service on Furnance
Raymond - Kenosha, WI
Complete the work in a professional and timely manner
Good experience
Paul - Kenosha, WI
Technician was on time, polite and professional. Good job
Excellent Service as usual!
Tom - Kenosha, WI
First Call is my regular Heating & Cooling company. They always provide excellent service for all our home environment needs.
Good
Irene - Kenosha, WI
Eric came ahead of schedule, which was nice. Observed social distancing and masking. Was thorough in troubleshooting.
Great service and price
Seven - Kenosha, WI
Ben was very polite and competent.
Great Service, Knowledgeable Service Technicians
Kathleen - Kenosha, WI
As always, First Call Heating and Cooling office personnel and technicians are courteous, professional, knowledgeable and do a fantastic job.
Very satisfied
Birge - Kenosha, WI
We have a boiler and a forced air systems. The boiler took more attention and he did a great job.
Matthew D.
Found boiler 1 off on limit error. Manually reset and monitored startup. Changed supply water temp from 180 to 170. Boiler cycling with call for heat. Bled radiators in apartment upstairs and classrooms. Found boiler 2 off on gas valve fault. Manual states resetting error via controller to correct issue. Could be an ignitor or fresh air exhaust issue, but could not get boiler to do issue again. All PVC exhaust are clear on outside of bldgs. Boiler 3 and 4 found no errors. Please bill from office, time on site
Ben E.
Serviced a bradford white water heater
Matthew D.
Found system running when arrived and just started as per customer. Did recall code on furnace PCB and found consecutive ignition proving failure faults. Cleaned flame sense and tested micro amps. 4.2 when running, well within range. Checked SAT for unit: 113° Running fine at this time Add equip info
Matthew D.
Changed diagnostics into tuneup as it was running when arrived, re call on board showed last 4 were limit trips, due to plugged filter. Checked thermostat and verified operation, re calibrated nexia for customer checked air filter, plugged changed with new one, cleaned condensate trap, cleared drain lines, inspected burners and heat exchanger, cleaned intake pipe, cleaned flame sensor, checked ignitor, 55 ohms, checked blower and inducer motor amperage, 8/.7 checked gas pressure, 1.2-3.1 modulating checked temperature rise, 55° checked all wire and electrical connections, and cleaned unit. Humidifier tested and working, changed water panel, tightened leaky solenoid outlet hose.
Ben E.
Installed new Bryant furnace
Brian C.
Customer bought a two stage furnace with wi-fi thermostat.
Tyler E.
Carrier furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Brian C.
Quoted customer a two stage furnace with wi-fi thermostat.
Matthew D.
Found furnace off with pressure switch error. Found drain trap plugged with debris and water backing up into secondary. Hoses look dark and stained from debris. Possibility of secondary HX failed. Sight glass clear and normal temp. No sign of rollout on ignition or CO smell present. Cleaned hoses and trap, informed customer of situation. We should quote a secondary HX to customer. Furnace is 14 years old. Please see if under warranty for parts and labor. Customer signed up for maintenance agreement
Matthew D.
Talked with management and determined West RTU was one with issues, serves maidpro storefront. Found thermostat in space satisfies at 72° Customer stated unit was blowing cost air, likely tripped on limit due to filters. Found rtu filters completely plugged, used basement stock to reinstall new filters. Tested unit. Unit cycles via tstat fine and is heating and satisfying. Unit is approx. 30 years old. Cannot get model serial from unit sticker. Bill from office. Time on site and call
Tyler E.
Carrier furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Tyler E.
Replaced sticking pressure switch in luxaire furnace causing heating issues. System is now running and heating well again. Also upgraded basic thermostat to a wifi thermostat per customers request so now they can monitor indoor temperatures of home when out of town! No further issues to report. Customer joined annual preventative maintenance plan with First Call heating and cooling
Ben E.
Installed Bryant ductless mini split
Ben E.
Installed Bryant ductless mini split
Mack T.
Just found a Luxaire high efficient furnace with a bad pressure switch
Mack T.
Just replaced a ignitor and pressure switch on a Goodman high efficient furnace
Tyler E.
Lennox furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Matthew D.
Found air dryer cutting out on low pressure control right away. Shawn has air compressor company charge unit a few weeks ago. While on site, did not find any way to charge unit. Only two lines hook into suction side, ones just a panel gauge and a cap tube line that handles as a safety. Looked thru entire manual, no information on charging. Informed Shawn of situation. He’s going to replace unit
Tyler E.
Carrier furnace had a tripped fuse causing heat failure. Replaced fuse, inspected/tested wiring, replaced air filter, adjusted blower speed, cleaned flame sensor, and verified operation. System is running and heating well with no further issues to report!
Brian C.
Quoted customer a new furnace.
Tyler E.
Trane furnace inspection. Recommended replacement of air filter and switching to a lower merv rating filter. Also recommended a duct cleaning. Furnace is running in good, safe, operating conditions. No further issues to report!
Tyler E.
Bryant furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Brian C.
Quoted customer a two stage furnace with smart thermostat.
Brian C.
Customer bought a 2 stage variable speed furnace with smart thermostat.
Matthew D.
Returned with correct kit and replaced gas valve and main board with kit. Replaced gas valve and checked for leaks afterwards. Changed board and wired in new pressure sensor, new gas valve harness, new furnace id plug, new limit harness. Tested operations afterwards. Running fine at this time
