Furnace, Heat Pump, & AC Repair in Caledonia, WI
Your Best Choice for Furnace, Heat Pump, & AC Repair in Caledonia, WI
In the Racine area, First Call Heating & Cooling, Inc. is well known for providing exceptional ac repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with First Call Heating & Cooling, Inc. because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace, Heat Pump, & AC Repair in Caledonia, WI. Call us today at (262) 634-9025!
Local Reviews
for Caledonia, WI
Great!
Liz - Caledonia, WI
Great service
Sue - Caledonia, WI
Friendly professional neat
Great Service
Pam - Caledonia, WI
Excellent service. Arrived at scheduled time. Very friendly and professional.
Great service!
Sue - Caledonia, WI
As usual, I received great service from First Call Heating and cooling!
Good service and price
Jerome - Caledonia, WI
Good
Jan.11
Donald - Caledonia, WI
Great Service
Dennis - Caledonia, WI
Always great service.
DavidStiemsma - Caledonia, WI
Eric was polite and professional.
Great service
Sue - Caledonia, WI
Always satisfied with the service I receive.
Great Service
Nancy - Caledonia, WI
Eric was thorough and explained things in detail.
Great Service!!!!!
Roni - Caledonia, WI
I always ask for Andrew because of his knowledge and his winning personality.
Great service
Kavita - Caledonia, WI
Good
Furnace check-up
Dave - Caledonia, WI
Andrew was pleasant
Great Experience
Paul - Caledonia, WI
Matthew did a very professional job and was very informative.
Personable and knowledgeable
Sue - Caledonia, WI
I always receive topnotch service from First Call. Tyler noticed the furnace filter is dirty in a short period of time and he recommended a duct cleaning company.
Great Company
Nancy - Caledonia, WI
From sales staff to installers all were awesome. Installers worked in extreme heat and finished my furnace, air conditioner, and water heater in record time.
Great service
Rick - Caledonia, WI
The guys took there time and went beyond to make everything look better and did a excellent job installing the units and explaining how everything operated .They were also right on time.Thanks for a excellent job
Friendly Service
Ross - Caledonia, WI
Great service
Sue - Caledonia, WI
My furnace went out over the weekend and First Call sent a serviceman out asap to fix the issue. Always great service!
great service and Greg was rightr on time
Kevin - Caledonia, WI
Greg was not only on time but also provided answers to my questions and was professional in all terms of the word.
Joevani C.
Condenser capacitor was faulty
Joevani C.
Ac maintenance on unit. Checked for cooling properly and it is.
Kevin N.
Bryant A/C tuneup, maintenance, and inspection. Checked thermostat, checked air filter, checked blower, fan, and compressor amperage, checked temperature levels, checked refrigerant levels, checked capacitor, cleared drain line, cleaned condenser coils, checked contactor and all electrical connections, and verified unit operation. System running and cooling well!
Kevin N.
Trane A/C tuneup, maintenance, and inspection. Checked thermostat, checked air filter, checked blower, fan, and compressor amperage, checked temperature levels, checked refrigerant levels, checked capacitor, cleared drain line, cleaned condenser coils, checked contactor and all electrical connections, and verified unit operation. System running and cooling well!
Joevani C.
ac tuneup, maintenance, and inspection. Checked thermostat, checked air filter, checked blower, fan, and compressor amperage, checked temperature levels, checked refrigerant levels, checked capacitor, cleared drain line, cleaned condenser coils, checked contactor and all electrical connections, and verified unit operation. System running and cooling well!
Mack T.
Just performed a tuneup on a Bryant air conditioner
Kevin N.
Trane furnace and ac tuneup: checked thermostat and verified operation, inspected heat exchanger, checked inducer, blower, motor amperage in furnace, checked fan and compressor motor amperage in condenser, cleared all drain lines, cleaned condensate trap and flame sensor, checked ignitor and temperature readings, checked all wire and electrical connections, checked gas pressures, checked capacitor and contactor, checked refrigerant levels, cleaned condenser coils and unit.
Joevani C.
(Ac tuneup check in) ac tuneup, maintenance, and inspection. Checked thermostat, checked air filter, checked blower, fan, and compressor amperage, checked temperature levels, checked refrigerant levels, checked capacitor, cleared drain line, cleaned condenser coils, checked contactor and all electrical connections, and verified unit operation. System running and cooling well!
Daniel W.
Precision air conditioning tuneup
Kevin N.
Upon arrival to a no heat call on a Trane XV90 furnace, changed the batteries in the thermostat using customer supplied batteries. Call for heat was successful. No error code on board. Cleaned flame sensor took continuity on igniter and found OL. Replaced igniter. Cycled furnace but flame wouldn’t travel to flame sensor so I removed burner tubes and cleaned with a wire brush. Furnace is working properly at this time.
Dominic G.
Bryant furnace install
Kevin N.
Luxaire Acclimate 9.V Series furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Kevin N.
Upon arrival to a no heat on a Goodman high efficiency furnace, customer informed me of a low buzzing noise coming from furnace. Client had changed batteries and reset filter notice on thermostat. Cleaned flame sensor and cycled furnace. Inducer motor was drawing 3.4 Amps but not turning. Bad inducer motor and will order a new on.
Kevin N.
Came to a no heat call on an Armstrong Air Ultra 5 furnace. Thermostat called for heat successfully. Noticed there was no ignition so checked continuity on igniter and found it open. Replaced igniter, cleaned flame sensor and cleared condensate line. Furnace is now functioning normal.
Kevin N.
Came out to a no heat on a Rheem high efficiency furnace and found the drain trap slightly clogged. Cleaned lines and trap, found no problem heating. Furnace is 19 years old and they are looking to buy a new furnace & A/C this year.
Karysa D.
Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well at this time.
Mack T.
Just found a bad igniter on a trane roof top unit
Karysa D.
Bryant furnace tuneup. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well at this time.
Kevin N.
Carrier furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Karysa D.
Trane furnace tuneup. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well at this time.
Andrew P.
Replaced faulty circuit board in Trane furnace. Cycled unit to verify correct operation. Furnace is now running and heating good at this time! Also noticed that humidifier is not working adequately. Made adjustments needed, humidifier is now working properly as well!
Karysa D.
Trane furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Ben E.
Serviced a trane furnace
Mack T.
Just replaced a ecm blower motor on a trane high efficiency furnace
Karysa D.
Bryant furnace tuneup, maintenance, and inspection. Checked thermostat, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Get a Quote | Maintenance | Guarantees |
Employment | Reviews |